Is Moissanite as Hard as a Diamond | Comparing Durability

Is Moissanite as Hard as a Diamond | Comparing Durability

Both diamonds and Moissanite are beautiful stones. They look very similar, but are they similar in terms of durability as well? Is Moissanite as hard as a diamond?

Diamonds are the hardest stone known to man, but Moissanite is also incredibly hard. Diamonds are ranked at 10 on Mohs Scale of hardness, while Moissanite comes in at 9.25—making it the 2nd hardest stone. Greater hardness means improved scratch resistance. Both stones are remarkable in that category.

Hardness is only one factor of durability. It’s important, but it’s not the only important consideration. We’ll address some other critical factors below.

Which is Harder Moissanites or Diamonds?

In 1812, a German mineralogist named Friedrich Mohs used ten reference minerals to create a comparative hardness scale. He essentially tested the ten rocks against each other to see which ones were capable of scratching other rock samples in the group. Since softer stones can’t scratch harder ones, this experiment process gave Mohs the ability to order the stones from softest to hardest. The softest material (Talc) was assigned a rating of 1, while the hardest material (diamond) received a grading of 10. The eight other stones fell between 1 and 10 based on their relative hardness.

The Scale that Fredrich Mohs created is known as the Mohs Scale of Hardness. It’s still widely referenced today. Again, it’s a comparative scale—not a precise measurement. All minerals or gemstones can be compared to the ten-point scale to communicate, or determine, their hardness level. 

All rocks on the Mohs scale can scratch all the other stones with a lower rating. For example, a level 5 gem or mineral can scratch every stone that ranks between 1 and 4.9. Likewise, a gemstone that scores a 5 can be scratched by any other gem that scores between 5.1 and 10.

While Moissanite isn’t the hardest stone known to man, it’s still incredibly hard. It ranks at 9.25 on the Moh’s Scale of Hardness. That means it’s the second hardest stone—harder than even Sapphires.

Those ratings mean that diamonds could scratch Moissanite, but Moissanite could not scratch diamonds. Because of these different hardness levels, you should take extra care when storing jewelry that contains a mixture of different types of stones. If various kinds of gems come in contact with each other (even within a jewelry box), accidental damage could happen to the softer stones. 

Damage to a softer stone isn’t the only risk. Most gems are much harder than gold and other precious metals, so scratches can easily impact your band as well if you are careful. To avoid damage, make sure that your jewelry is held in place (immobilized) during storage, so it can’t come into contact with other pieces.

Why Does the Hardness of Moissanite and Diamonds Matter?

Gemstone hardness is vital in jewelry because it affects the amount of damage that could occur as you wear your ring in everyday life. Gems on rings are particularly prone to be bumped or scratched by other objects such as metal keys, doorways, pots and pans, and thousands of other everyday things. You use your hands constantly! Even when you aren’t actively picking things up, your hands are often in motion—in fact, you probably swing them by our side as we walk. All of these motions can cause a potentially damaging impact for a stone that’s too soft.

Diamonds are unlikely to be scratched through casual bumps against the common items you interact with daily. Moissanite is softer than diamonds but still incredibly hard—harder than garnets (a 6.5 to 7.5 on Moh’s Scale of Hardness), emeralds (7.5 to 8), and even Sapphires (9).

Even though both diamonds and Moissanite are unlikely to be scratched by normal contact with various everyday items, pressure can make a big difference. Imagine picking up a diamond ring with just two fingers and then very lightly dragging it across a piece of sidewalk. Because there was no real pressure, the stone will likely be unscathed. If you take the same ring and press down as hard as you can as you drag it across the same stretch of sidewalk, you’re much more likely to see scratches form. The more pressure you apply, the more likely the gem is to be damaged. 

Which is Tougher, Moissanite or Diamonds?

Toughness is another critical component of overall durability. It’s different from hardness. Toughness refers to the resistance of a gem to shattering, cracking, breaking, or chipping when a hard impact takes place. Although many people assume that a ‘hard’ stone will also be ‘tough,’ that’s not always the case.

Diamond’s extreme hardness also makes it brittle. Rather than flexing when it receives a strong blow, it’s more likely to crack or shatter. In addition, diamonds commonly have cleave lines, or inclusions, that can further weaken them and make them more susceptible to this kind of damage.

My sister once had a heart-stopping experience with her beautiful diamond ring. She took it off and placed it on a bathroom counter while getting ready for the day. At some point, the ring accidentally got knocked off the counter and fell to the floor. As she examined the ring for damage after picking it up, so noticed that the diamond had cracked right down the middle. It was an emotional day for her!

The jeweler who examined her broken gem told her that the diamond had an inclusion in the spot where it broke. The diamond hit her hard tile floor in just the right position to cause the stone to break along its weakest point—the inclusion. Fortunately, the ring was insured! She was able to collect enough money to replace it with something identical. It would have been a real financial hardship if the ring wasn’t covered. Most likely, she couldn’t have replaced it with a comparable ring at that point in her life. Accidents happen! Good ring insurance can be surprisingly inexpensive, and it offers a lot of peace of mind. This is the jewelry insurance provider that I trust most. They insure jewelry anywhere in the world, and It only takes about 30 seconds to get a free quote online.

Moissanite is less hard and less brittle than diamonds. It’s, therefore, less likely to crack, break, or chip. Moissanite also has fewer inclusions, which gives it fewer additional weak spots in the stone. 

What is the Heat Resistance of Moissanite and Diamonds?

Moissanite has high heat resistance. It can tolerate temperatures in excess of 2000° F (1093° C). That’s a temperature that’s hotter than most house fires!

Diamonds are made from carbon, which influences how they react to heat. At temperatures above 1400° F (763° C), they can burn. The diamond crystals become smaller as the carbon and oxygen combine to form carbon dioxide. At high enough temperatures, the diamond begins to disintegrate, while any impurities in the gem are left behind in the form of ash.

Moissanite is far more heat resistant than diamonds—but does that really make any difference? When you are wearing your jewelry, it’s not going to come in contact with such extreme temperatures. 

Jewelry is often exposed to extreme temperatures during manufacturing or repair processes. For example, jeweler’s torches are used to shape and join metals. Those torches can get as hot as 6300°F. Jewelers use different torches, gasses, and flame settings to control the temperature for various needs. The heat resistance of Moissanite makes it easier to work with and less susceptible to heat-related damage.

Moissanite’s heat resistance also makes it ideal to use in a variety of commercial applications that require a high heat tolerance. For example, Moissanite is sometimes used in ceramic brake discs for automobiles. The Herschel Space Observatory also appreciates the durability of Moissanite. Their space telescope has a moissanite mirror. Moissanite’s hardness, toughness, and heat resistance made it ideal for that application.

While Diamonds are harder than Moissanite, durability goes well beyond just hardness. You can decide which stone is most durable, but many feel that Moissanite is the superior stone once all durability factors have been weighed and considered.

Maintenance Needs for Moissanite Compared to Diamond 

All center stone options will be affected by the dirt and oil build-up that naturally occurs as you wear your ring. The more frequently you wear the ring, the faster that build-up will happen. That surface coating interferes with the ability of light to enter and exit the stone the way it otherwise would. The impact is a more muted, dull, and lifeless ring. 

Diamonds aren’t impacted by the build-up of dirt and oils as quickly as many other ring options like Cubic Zirconia or White Sapphire. That means you don’t have to clean them quite as often to keep them sparkling. Of course, cleaning will always make them sparkle better, but they tend to sparkle right through the grime for quite a while.

Moissanite is MUCH less quickly impacted by lack of cleaning. It’s so sparkly that it can continue to throw off impressive light flashes through weeks and months without any cleaning or care. I’ve found it to be the lowest maintenance stone available. Again, while cleaning is still a good idea, and it can always maximize sparkle, Moissanite seems to be the least insistent that you make time to clean it regularly. If you want to learn how to quickly clean Moissanite jewelry, this recent post outlines the best processes.

The Cost of Moissanite compared to Diamond.

The cost difference for a Moissanite Engagement Ring and a Diamond Engagement Ring, for example, is significant. There’s typically an 85% – 90% savings on the cost of the loose stone. Of course, the metal (the ring) that the stone is mounted on will cost the same amount either way. When you look at overall savings on the finished ring, it’s commonly 50% or more.

Conclusion

Diamond is harder than Moissanite, but Moissanite is still very hard. Moissanite is tougher than Diamonds. Moissanite is also far less expensive and requires less maintenance. Because Moissanite is such a durable and forgiving stone, it’s hard for many people to justify spending 90% more for a diamond that looks almost identical.

Because Diamonds are harder than Moissanite, they are less likely to be scratched. Moissanite is more durable than diamonds in other ways—they’re less prone to breaking or chipping. Moissanite also has higher heat resistance, making manufacturing and repairs easier. Overall, there’s a strong argument that Moissanite is the most durable stone and the best bargain for those searching for an engagement ring or wedding ring!

Related Posts

Moissanite Inclusions | Impact on Look, Cost, & Durability

Can Moissanite Scratch Glass? | 3 Implications of Hardness

Can Moissanite Scratch, Break, Chip, or Crack? | Durability

 

How To Clean And Care For Moissanite Rings | 3 Best Methods

How To Clean And Care For Moissanite Rings | 3 Best Methods

Moissanite is a super hard and durable stone. It repels dirt and grease even better than diamonds, so they often require less care and maintenance. While that’s helpful, moissanite rings will still need occasional cleaning to keep them looking as bright and sparkly as possible.

To clean your moissanite ring, either put it through an ultrasonic cleaner or wash it in a small bowl of warm water with mild dish soap. Gently scrub away dirt using a soft-bristled toothbrush. Avoid abrasive cleaners! Rinse your ring well with fresh water and dry it thoroughly using a soft cloth

We spoke to several jewelers to learn everything it takes to clean and care for a moissanite ring – how often you should clean them, the best ways to clean them, and how you can keep your Moissanite from getting cloudy or stained. We’ll share more detail on 3 key cleaning methods and lots of helpful precautions below.

Do You Have To Clean Moissanite Jewelry?

One of the advantages of Moissanite is that the crystal contains silicon as well as carbon (diamond is pure carbon). Because of the difference in composition, Moissanite can repel grease and dirt from its surface.

Moissanite stays clean and sparkly for much longer than diamond. Because of this, Moissanite rings tend to need less frequent cleaning and care in general.

Even though Moissanite is a fairly low-maintenance stone, you should still clean it periodically. Cleaning Moissanite is a quick and simple process that keeps the stone looking as clear and sparkly as possible.

Moissanite tends to develop what is known as an “oil slick”—a surface-level stain that has a rainbow-like, iridescent appearance, similar to motor oil. If left untreated, oil slick stains can grow, becoming more visible. Also, the longer they are left on the stone, the more difficult they are to remove.

Oil slick stains on Moissanite often appear when it comes in contact with harsh substances like hand sanitizer, chemicals in soaps, lotions, cleaning detergents, hair gel, hairspray, and even mineral-rich water over time.

Regular cleaning can help prevent this type of stain from forming on the surface of your stone. Here’s a link to another post where you can learn more about how to prevent and treat oil slick stains on your Moissanite.

Does Moissanite Get Cloudy?

Moissanite won’t discolor or turn cloudy; however, because Cubic Zirconia (CZ) sometimes does go cloudy, some needlessly worry that Moissanite may behave similarly. In reality, CZ is a manufactured stone with a completely different makeup than Moissanite. CZ is a much softer, more porous stone. It’s also not chemically stable on its own. Cubic Zirconia needs to have special stabilizing agents added to help it stay clear. When manufacturers cut corners by skipping or skimping on quality stabilizers, the stone can discolor or get cloudy and dull over time. Unfortunately, this kind of clouding isn’t reversible in Cubic Zirconia—you can’t fix it, no matter how much, or how well, you clean the stone.

Again, Moissanite will never become cloudy or lose its brilliance and clarity simply because it’s aging. As with diamonds, or any other stone, Moissanite can have its sparkle muted, to some degree, as it picks up grease and dirt over time. Dirt and oils in your everyday environment can cause a film to build up on the stone’s surface, making it appear cloudy. This form of cloudiness is just on the stone’s surface, and it’s temporary. It can easily be cleaned away with minimal effort, restoring the stone’s original beauty.

Moissanite will develop a cloudy appearance more quickly if you frequently expose the ring to soaps, lotions, cosmetics, hard water, or seawater. If you take your ring off before swimming, washing your hands, and doing the dishes, you won’t need to clean the ring as often.

How Often To Clean A Moissanite Ring

Cleaning your Moissanite regularly will ensure that your ring stays sparkly and continues to look brand new. But how often will you need to clean your moissanite jewelry?

The ideal cleaning schedule for your moissanite ring will mostly depend on how much you wear it. If you only wear the ring occasionally, you’ll probably only need to clean it every six months or so. On the other hand, if it’s an engagement or wedding ring that you’re constantly wearing, you should probably plan to clean the ring once a month.

Best Ways To Keep Your Moissanite Ring Clean And Sparkly

There are many different ways to clean a moissanite ring. We asked three highly experienced jewelers about the best methods for cleaning a moissanite ring.

  • The best way to clean a moissanite ring is using warm water, a little mild dish soap, and a soft-bristled brush.
  • Silver polishing cream or a commercial jewelry cleaning solution can be another great way to clean a moissanite ring. You should clean the stone using a soft, non-abrasive cloth or a soft-bristled brush.
  • Jewelers also recommend using an ultrasonic jewelry cleaner from time-to-time, to give your moissanite ring a professional deep clean.

DIY Jewelry Cleaner For Moissanite

You don’t have to have a bottle of commercial jewelry cleaner lying around your home before you can be successful at cleaning your ring. As I mentioned earlier, Warm water, a mild detergent, and a soft-bristled toothbrush can work wonders.

Only use soap that doesn’t contain harsh chemicals, fragrances, or moisturizers. You don’t want anything that’s likely to leave a chemical film on the stone’s surface.

You need to look for a soft-bristled brush (an old toothbrush works well). I typically purchase a soft infant toothbrush from a local dollar store for jewelry cleaning. A soft, non-abrasive cloth can also work well.

Start by adding a couple of drops of mild dish soap to a small bowl and then filling the bowl with warm water. Next, place your ring into the solution and let it soak for a couple of minutes to begin loosening dirt and grime.

Gently scrub your ring in warm soapy water using the brush or cloth. Try to get into all the small details and crevices where grease and dirt can accumulate and hide.

Fill another bowl with clean water and thoroughly rinse your ring. It is vital to get all the soapy residue off.

Using a clean, dry, lint-free cloth, dry your moissanite ring thoroughly. If you allow tiny drops of water to dry on the ring, it could cause water stains, and you run the risk of residue remaining on the surface.

To ensure your ring is 100% dry, you can use a blow dryer to blast away the last bit of moisture and ensure you get to even the hardest to reach crevices dry.

Commercial Jewelry Cleaners For Moissanite

If your moissanite ring has developed a cloudy film or you see the beginning of an oil slick stain, it is best to clean your ring using a commercial jewelry cleaner and a brush or cloth.

Look for a jewelry cleaning solution that is non-toxic and safe to use on silver, gold, platinum, and non-porous gems. It should not contain any ammonia, phosphate, bleach, or butyls.

All the jewelers we spoke with recommended this one. It’s effective and an easy one to use.

Start by placing your ring inside the dipping basket, which comes with the jewelry cleaner. Allow your ring to soak in the cleaning solution for 2 to 3 minutes.

Use a gentle brush to scrub dirt and other build-up out of the ring’s crevices. Let it soak in the solution for another minute, remove it, and rinse it thoroughly with lukewarm water.

Grab a soft, lint-free cloth to dry the ring. Be very careful to dry it thoroughly!

To enhance your ring’s brilliant luster, use a polishing cloth to finish the cleaning session. Your ring should end up looking just like it did the day you got it!

Ultrasonic Jewelry Cleaners For Moissanite

The easiest way to give your moissanite ring a deep clean is to use an ultrasonic jewelry cleaner. This device is what professional jewelers use right before they hand a piece of jewelry over to its new owner.

It works by creating super high-frequency vibrations that get every bit of dirt and grime off your jewelry.

Ultrasonic jewelry cleaners are affordable and readily available online. These machines provide inexpensive protection for the rings you want to protect most. This one was recommended by two of the jewelers we spoke with.

To professionally clean your moissanite ring at home, all you need to do is fill the machine with a cleaning solution, place your ring inside, close the lid and wait.

It only takes 3 minutes for an ultrasonic jewelry cleaner to do its thing. The jewelry cleaner will even tell you when the machine has cooled enough for you to take your ring out.

Moissanite is durable enough to handle Ultrasonic cleanings; however, you should be careful if your moissanite ring has a more fragile setting. Pave and tension settings can sometimes loosen, for example, in ultrasonic cleaners.

Can A Moissanite Ring Get Wet?

It may seem extremely risky to take your valuable ring off each time you wash your hands, take a shower, or swim. Nightmarish thoughts, like the ring slipping down the drain, can cause people to leave their ring on their finger 24/7.

All professional jewelers recommend taking off a moissanite ring when you wash your hands, bathe, shower, or swim. This is because certain chemicals and sediments in the water can damage your ring over time.

Moissanite is a hard, durable stone, so water will not necessarily harm the stone internally. But minerals in the water can begin to interfere with the brilliance of your ring, eventually making it look dull and lifeless. Therefore, it is essential to limit your ring’s exposure to hard water with high levels of dissolved minerals.

Tap water is commonly treated with chlorine to make it safe to drink. However, chlorinated water is far from safe for jewelry.

Chlorine is a corrosive chemical that will not harm a moissanite stone, but it can weaken its metal setting. Gold is particularly susceptible to chlorine.

Exposing your moissanite ring to chlorinated water regularly (like when you wash your hands) may cause delicate bits of metal, like joints or prongs, to weaken or break over time. A loose or broken prong could eventually cause the stone to fall out of its setting and get lost.

Because of all this, it’s important to take your moissanite ring off before jumping into a chlorinated pool or hot tub.

Saltwater also needs to be avoided when it comes to moissanite jewelry. Similar to chlorine, salt has corrosive properties that can compromise the strength of your ring’s metal setting.

If you’d like to learn more about precautions to take with your Moissanite ring when you’re around water, as well as why they’re important, take a look at this article about wearing Moissanite in the pool, hot tub, and shower.

What Can Damage Moissanite?

While Moissanite is just beneath diamond on the Mohs hardness scale, it is still extremely hard and unlikely to get scratched as a result of normal daily wear. Its extreme hardness means it likely won’t be harmed if it accidentally bumps against glass, nails, staplers, door frames, or most other everyday objects.

However, this is not to say that Moissanite is impervious to physical damage! Like diamonds, Moissanite can still crack, get chipped, or break in half. The size, position, and number of the inclusions in your stone can determine how likely a strong impact in the right place might be to cause real damage to your Moissanite stone.

Because of this, it’s best to take your ring off before cleaning the house, doing yard work, or participating in a risky hobby or sport, for example.

Does Moissanite Last As Long As Diamond?

A moissanite ring will last just as long as a diamond ring. So it’s a complete fallacy that you can’t have an heirloom moissanite ring.

On Mohs hardness scale, diamond is a 10, while Moissanite rates a 9.25—that’s even harder than Sapphires! But, of course, hardness is not the only aspect to consider when choosing a stone. Toughness—the resistance of the stone to chipping or cracking is another important factor.

In terms of toughness, Moissanite actually beats diamond. Diamond is a lot more brittle due to its pure carbon crystal structure.

Conclusion

Regardless of how careful you are with your moissanite ring, it is important to clean it on a regular basis to keep the stone looking its best. If you wear your ring all day, every day, it’s a good idea to clean it once a month.

To clean a moissanite ring, all you have to do is give it a soak and a gentle scrub in some warm soapy water. It is important to rinse and dry the ring thoroughly after cleaning. If you’d like, you can then polish it with a special jewelry cloth to keep it looking brand new.

  • Avoid exposing your ring to cosmetics, perfumes, lotions, hair products, soaps, and household cleaning products.
  • Do not let your ring come into contact with hard water, chlorinated water, or saltwater.
  • Remove your ring while doing activities where your stone might take some hard bumps.

You can also use an ultrasonic jewelry cleaner to do a professional cleaning job from home. With the right approach, cleaning your Moissanite Engagement ring or wedding ring should be an inexpensive, quick, and simple process.

Related Posts:

Does Moissanite Lose its Sparkle? | Keep it Looking like New

Will Moissanite Last Forever? | Frugal Family Heirloom Rings

Can Moissanite Scratch, Break, Chip, or Crack? | Durability

 

 

Is Moissanite Expensive? | What You Can Expect to Spend

Is Moissanite Expensive? | What You Can Expect to Spend

For many decades, diamonds have been the traditional choice for engagement and wedding rings. However, other stones have recently become a much more visible and popular option for these rings. Moissanite is currently one of the most popular diamond alternatives available. Those considering Moissanite often have questions about the look, durability, and color options—but cost is also top-of-mind.

Is Moissanite expensive? Moissanite isn’t expensive when compared to the cost of diamonds. A loose Moissanite stone will often be 80-90% less expensive than a loose diamond of comparable size and quality. Total savings on a completed ring will commonly be in the range of 40-60%.

Many factors influence the price of a particular Moissanite stone. We’ll outline some of the factors that affect cost most directly in the paragraphs that follow.

 

Factors That Influence The Price Of Moissanite

Like diamonds, Moissanite has various grades and qualities of stones available. If you’re shopping for a Moissanite ring, you’ll want to look at the stone’s size, cut, color, and clarity. Those are the factors that can influence the cost of individual Moissanite stones most. We’ll take a look at each of those below.

 

How Size Influences the Price of Moissanite

Larger stones are typically more expensive than smaller stones of comparable quality. The size of many gems, like diamonds, is communicated in carats (a measurement of weight); the size of Moissanite, on the other hand, is expressed in millimeters (mm). A 6.5 mm Moissanite stone is about the same size as a 1-carat diamond. Moissanite isn’t measured in carats because it weighs about 10% less than diamonds. As a result, a one-carat Moissanite would be about 10% larger than a 1-carat diamond. To solve this, people typically use a carat equivalency based on size (ie. a 6.5mm Moissanite is the same size as a 1-carat diamond).

Because Moissanite is so much less expensive than diamonds, you could purchase a much larger Moissanite center stone for your ring than you could otherwise afford if purchasing a diamond of similar color and clarity. Some decide that they would rather have an 11.25 mm moissanite ring (equivalent to 1.5 carats), for example, than settle for a .5 carat diamond.

 

How Cut Influences the Price of Moissanite

Moissanite’s cut influences its light refraction and brilliance. The position and angle of cuts determine how light enters and exits the stone. As a result, the cut can enhance or destroy sparkle. A Moissanite stone with a high cut grade will refract light optimally, producing the flashes of brilliant sparkle that Moissanite is famous for. Conversely, a Moissanite stone with a low cut grading will have far less sparkle.

Dull and lifeless-looking Moissanite stones won’t retail for newly as much as well cut stones that dance with lively sparkle.

 

How Color Grading Influences The Price Of Moissanite

Like diamonds, some Moissanite can have a slightly yellow undertone. Colorless stones are typically the most desirable, so the more colorless a Moissanite stone is, the more expensive it will be. Moissanite stones are graded according to their color as follows.

  • A grading of ‘D’, ‘E’, or ‘F’ is considered colorless.
  • A grading of ‘G’, ‘H’, or ‘I’ would be referred to as near colorless.
  • A grading of ‘J’ or ‘K’ would indicate a stone with some color.

As mentioned above, colorless and near-colorless Moissanite will be more expensive. Still, because Moissanite is so much cheaper than diamonds, the quality upgrade is something many couples can affordwhile still saving significant money.

How Clarity Influences The Price Of Moissanite

The clarity of a Moissanite refers to its perfection. Like diamonds, Moissanite can have small internal imperfections, known as blemishes and inclusions. These inner flaws can seriously impact the way light travels through the stone. The number, size, and position of these imperfections influence the degree to which they’re able to rob a stone of its ability to sparkle normally. Because these internal flaws are typically too small to see with the naked eye, they usually don’t impact the general beauty of the ring beyond their impact on sparkle.

The clarity of Moissanite is graded on a scale of ‘AAAA’, ‘AAA’, ‘AA’, ‘A’, and ‘B’. The B rating has the most imperfections, while AAAA has the fewest. Unfortunately, AAAA Moissanite is tough to find, so a Moissanite with a clarity grading of AAA is typically your best option if you want to minimize imperfections.

I wrote another article that goes into much greater detail on how inclusions impact Moissanite. While they can impact appearance, they also have the ability to impact durability—depending on size and location. Hopefully, the post is helpful in providing better awareness as you shop and compare stones.

As expected, the higher the clarity grading of a particular Moissanite stone, the more it will cost. As you’ve just seen, many factors influence the price of a Moissanite. While you could find a cheaper option by selecting a stone with lower gradings, there are real advantages to choosing a higher quality stone—even though it’s a little more expensive.

 

The Advantages Of Choosing A More Expensive Moissanite

Moissanite with higher grading will ultimately be more beautiful and something you’ll likely be happy with long-term.

There are many unbranded Moissanite rings available at a lower price. However, when buying one of those stones, there’s also a lot you don’t know. Some well-respected Moissanite producers provide a certificate of authenticity. In addition, they include valuable detail regarding the size, cut, color, and clarity of the stone you purchase—and a warranty that provides peace of mind. When you click on the following link, you can find information on the Moissanite producer that we trust most, and save $100 on your purchase!

Moissanite with higher gradings will naturally have more sparkle. Fortunately, you don’t have to spend a fortune to upgrade your Moissanite stone’s quality. If you’re buying Moissanite instead of a diamond, you’ll be able to get larger, and much better quality stone, while still saving an enormous amount of money! While you shouldn’t break your budget, remember that you’ll wear this ring for many years to come.

Because you’re buying something that you’ll wear and look at frequently for many years to come, the relatively small cost of upgrading to a better color, cut, and clarity will likely be well worth it. The quality of your stone is important enough, that it might be worth buying a smaller stone that has better grading, instead of getting a larger stone with poor grading.

 

How Much Should You Save For Your Moissanite Ring?

There’s no shortage of opinions on how much you should feel obligated to pay for your engagement ring. Some pretty standard advice is 2 to 3 months salary. For example, if you earn $5,000 per month, many would suggest that you spend $10,000 to $15,000 on your engagement ring. In reality, you shouldn’t feel obligated to spend any particular amount. It really should be more about what your partner likes and what lines up with your budget best. For most Moissanite rings, that could mean spending anywhere between $1,000 and $3,500though a huge component of the total cost has to do with the metal chosen for the band and the additional stones used to embellish its surface.

Rather than saving and spending based on a 2 to 3-month salary expectation, you should decide the size, cut, and clarity that you want for your Moissanite ring and then shop accordingly. Because Moissanite is so much less expensive than diamonds, odd arethat your Moissanite engagement ring won’t anywhere close to 2-3 months salary.

 

In Conclusion

Many factors influence the price of Moissanite. The stone’s size, along with cut, color, and clarity gradings, for example. Even though higher gradings come at an increased cost, Moissanite is still far more affordable than many alternatives, like diamonds.

You can purchase a larger Moissanite with much higher gradings for far less than you would spend on an event remotely comparable diamond. Because of this, Moissanite is an excellent option for anyone wanting a beautiful ring at a more affordable price.

 

 Related Posts:

How Much are Moissanite Rings? | Finding Inexpensive Options

Moissanite is Cheaper Than Diamond – 6 Key Reasons Why

Will Moissanite Go Up in Value? – What it’s Worth Used & Why

 

Does Moissanite Sparkle Like a Diamond? | Frugal Rings

Does Moissanite Sparkle Like a Diamond? | Frugal Rings

Moissanite is one of the top diamond alternatives available currently. It comes closer than any other stone to the most desirable qualities of diamonds yet costs significantly less! Savings certainly aren’t the only important factor to consider when planning an engagement ring, wedding ring, or anniversary band. In this post, we’ll look into the differences in appearance and sparkle (any compromises) that may accompany the big gap in cost.

Does Moissanite sparkle like a diamond? Both Moissanite and Diamond are sparkly, but they aren’t identical. Moissanite processes light differently. It has a higher refractive index, which causes it to throw off more sparkles as colorful flashes than diamonds can. They look very similar, but there are a few distinguishing characteristics.

In preparing to compare the sparkle of Moissanite and diamond, it’s helpful to understand that the two stones are different in some important areas. They’re cut differently, formed differently, and handle light in very different ways. We’ll explain more below.

Can You Tell a Difference Between Moissanite and Diamond?

Moissanite looks very similar to diamond, but they aren’t identical. My kids have some friends in our neighborhood that are considered identical twins. My children can tell them apart pretty well after spending lots of time with them, but I still can’t. Even identical’ twins aren’t actually identical. In reality, their physical similarities are significant, and any distinguishing physical characteristics are minor enough that they’re hard to notice and remember (unless you spend enough time with them comparing and contrasting to notice subtle differences).

Moissanite and Diamonds have a similar relationship, they look almost identical to an untrained eye, but they aren’t. Moissanite has more sparkle than diamond because It’s naturally double refractive. Because of this, Moissanite is cut differently than diamonds are, to work with the natural characteristics of the stone.

Part of the reason for Moissanite’s increased sparkle has to do with its dispersion properties. Moissanite has twice as much dispersion as diamonds. Dispersion relates to the way that light enters a ring, is bent, broken up, and reflected back toward the eye. Dispersion presents itself as colorful light flashes (commonly referred to as ‘fire’) that dance across the surface of the stone as it’s moved around under direct light.

All the extra Fire becomes far more distinctive, and apparent, in larger Moissanite stones. If you’re wearing a 1 carat (6.5 mm) Moissanite stone, for example, the difference in fire won’t be nearly as noticeable as it might be if you’re wearing a 3 carat (9 mm) stone. If you’re thinking of purchasing a Moissanite ring, you may want to give some thought to size. After hearing questions like, ‘Do moissanite rings look fake?’ repeatedly over time, I wrote an article titled, When Does Moissanite Look Fake? that might be worth reviewing as you decide on the right stone size for your ring.

The rainbow-like effect of light that Moissanite delivers in abundance sets it apart from diamonds—which reflect less color, but larger amounts of white light. Because more white light is refracted in a diamond, the resulting sparkle is somewhat different. These sparkle tendencies are further enhanced by the different ways that Moissanite is cut (the facet pattern).

The refraction index refers to the speed at which light can travel through the material. Moissanite’s refraction index reading is 2.65, while diamonds have a refraction index of just 2.42. It’s because of this distinction that Diamonds tend to have lower levels of rainbow color refraction and higher white light refraction.

Diamonds reflect light in three different ways—through brilliance, dispersion (the rainbow colors), and scintillation (the surface sparkle).

 

 

Will Moissanite Pass a Diamond Tester

I was surprised a couple of weeks ago when I was around the twins I mentioned earlier and their parents. Their father bent down slightly to take a close look at one of them. He then hesitantly said, you’re Landon, right? His son confirmed his identity (like that’s not an unusual exchange).

I was a little shocked because I had always assumed that the parents of identical twins would be able to tell them apart instantly and effortlessly. I learned that isn’t always the case. The same is true with Diamond rings and Moissanite rings. Sometimes even the jewelry professionals that study these materials and know them best, can’t tell them apart by sight. Because the two stones are so similar in appearance. Because of this reality, sophisticated electronics (Diamond testers and Moissanite testers) have been created to reveal what the trained eye sometimes can’t discern.

A quality Diamond tester will be able to tell its operator that a Moissanite engagement ring isn’t a diamond engagement ring, for example, but it won’t reveal the identity of the non-diamond stone. Diamond testers typically just answer that one question for their handler, “is this stone a diamond?” After finding out that a particular stone isn’t a diamond, a Moissanite tester could be used to either identify the stone as Moissanite, or rule that possibility out as well. There are testing units available that combine a Diamond and Moissanite tester in one unit.

 

Does Moissanite Lose its Sparkle?

Diamonds are considered an heirloom stone, because, with proper care, they should last forever and maintain their original beauty as they’re handed down from generation to generation. Maintaining sparkle is an important part of that enduring beauty.

Fortunately, Moissanite is also an incredibly hard stone that could certainly be considered a forever stone if cared for. Moissanite and Diamond can both lose their sparkle if oils and dirt collect on their surface and block light from entering and exiting the stone. Any muting that’s caused by this type of buildup is temporary. Once the ring is cleaned, it should sparkle just like new again!

 

Which Moissanite Shape Looks Most Like a Diamond?

Round-cut Moissanite tends to look most similar to diamonds. As mentioned earlier, size is also an important consideration if you want your Moissanite to be able to look as similar to a diamond as possible. Size matters both because wearing a center stone that’s way oversized for your income is a quick giveaway that your stone isn’t diamond, but also because distinctions in sparkle qualities are more apparent in larger Moissanite stones.

 

The Color of Moissanite vs the color of Diamonds

Even though Moissanite is lab-created, it still comes in a variety of shades. A grading scale is used to communicate the color qualities of individual stones. That scale uses a range that runs from ‘D’ to ‘Z’. Perfectly colorless stones are assigned a ‘D’ grade, while on the other end of the spectrum, stones with a yellow hue might end up graded as a ‘Z’.

Diamonds also come in a wide range of shades. Those containing some amount of yellow or brown shading are most common, while completely colorless diamonds are much more rare and expensive! The same ‘D’ to ‘Z’ color scale mentioned above is also used to communicate Diamond color.

 

In Conclusion

Moissanite and Diamonds are incredibly similar on the surface, but they aren’t the same. A trained eye can distinguish the two stones based on sparkle. Today’s electronic gadgetry can certainly distinguish the two stones when subtle visible qualities alone aren’t enough.

Moissanite’s lively colorful sparkle, incredible durability, and reasonable cost have made it a popular choice for engagement rings, wedding rings, and more casual jewelry pieces.

 

Related Posts:

Is Moissanite Tacky? | What Friends & Family May Think About It

Does Moissanite Lose its Sparkle? | Keep it Looking like New

Lab Created Diamond vs Moissanite | Look, Durability, & Cost

Can you Insure a Moissanite Ring? | The Pros, Cons, & Costs

Can you Insure a Moissanite Ring? | The Pros, Cons, & Costs

While Moissanite rings are far less expensive than comparable diamond rings, the overall investment can still be significant. That sizable investment can often lead couples to wonder if insurance is an option for them.

Can you insure a Moissanite ring? Moissanite rings can be insured, the same way that diamond rings often are. Once rings are insured, claims can often be filed for loss, theft, or physical damage. The cost of coverage will depend on the amount of insurance needed and the specific insurance channels that you seek coverage through.

In the paragraphs that follow, we’ll share information on the cost and process of insuring your Moissanite rings. Certain insurance channels are typically cheaper than others, so we’ll explain your options below.

 

Insurance Isn’t Just For Diamond Jewelry

It’s common for me to get questions about whether Moissanite engagement rings or Moissanite wedding rings can be insured. There’s a common feeling that it makes sense to insure expensive diamond jewelry, but Moissanite owners aren’t sure if insurance companies would even cover their less expensive Moissanite jewelry. They also worry that the cost of insurance might be too high for coverage to make sense. Neither of those assumptions are true. Coverage is available for Moissanite, and the insurance provides incredibly inexpensive peace of mind!

Whether your Moissanite ring was $800 or $5,000, ring insurance can protect you from the common issues that might lead to loss and replacement.

 

What Could Go Wrong?

It’s really hard to anticipate the loss of a ring due to damage, theft, or misplacement. Even if you’ve had your ring for decades without any problems, your track record could change quickly.

When my wife and I had been married for about 5 years, we had a window company install new replacement windows in our home. Earlier that day, my wife had been doing some cleaning and removed her diamond ring to protect it. She set it on a window sill nearby and fully intended to slip it back on a few minutes later when she finished cleaning.

Later that afternoon, my wife went looking for her ring, but the window sill was bare. The empty sill sat next to a brand new window. My wife couldn’t believe that the ring was missing, so we scoured the area both inside and outside of the window, guessing that it got knocked to the ground accidentally. When our search turned up nothing, we called the window company to see if they had seen the ring. At first, they seemed to think we were off our rocker but said they hadn’t seen anything…but the owner later found that one of his employees had knowingly brushed the ring into one of his tarps. In a moment of poor judgment, he apparently took the ring to see if he could sell it. Fortunately, we got the ring back, because we had no insurance, and it would have been painful to come out of pocket for a replacement ring at the time.

Jewelry insurance typically covers your ring against loss, theft, and physical damage. That type of protection is reassuring because even if your ring just slips off your finger while you’re playing in the ocean, you’ll be able to get a replacement!

 

Why You Need Insurance

Hopefully, you’ve never lost or damaged a special ring in the past. When your ring is uninsured and the unthinkable does happen, it’s painful in two very different ways. First, you have the emotional pain of losing a ring with deep sentimental value. Second, there’s the financial impact. It can really hurt to shell out thousands of dollars to replace a ring! It’s like adding insult to injury in many ways. If you can’t afford a comparable replacement, you sometimes end up with a very different kind of ring to tide you over, which can also be sad.

My younger sister once damaged her beautiful diamond ring. She had it sitting on the bathroom counter while she showered. When she later reached for it, the ring somehow got bumped off the counter and hit their tile floor. As she picked up the ring and examined it, she noticed something horrifying…the diamond had cracked right down the middle! She learned that day that diamonds are incredibly hard (scratch resistant), but extreme hardness also makes them very brittle (susceptible to cracking or breaking with the right kind of impact)!

Moissanite is the second hardest stone known to man—it’s even harder than Sapphire! That means it also has great scratch resistance but it may be more brittle than many other types of stones too. Don’t get me wrong, diamonds and moissanite don’t crack or break easily, but it certainly can happen… and that’s the very type of unexpected damage, and loss, that ring insurance can help protect you from.

Fortunately, my sister’s ring was insured! Their business was going through a slump at the time and money was tight, so her options would have been extremely limited without the insurance payout.

 

Ring Insurance Options

You have a few different options when it comes to insuring your Moissanite ring. I’ll briefly explain all of them so you can decide what fits your finances and coverage needs best.

 

Adding Your Ring as a Rider to an Existing Policy

You can often get coverage for jewelry items under your existing homeowner’s or renter’s policy. Coverage amounts and exclusions (exceptions to coverage) vary by insurance company, so please ask your insurance agent, or broker, for those important details. Here’s some general information on how this type of coverage normally works.

Some policies have a small amount of built-in protection for jewelry. That provision often covers losses up to $1,500 or so. If your ring would cost less than about $1,500 to replace, this coverage option may be a fit for you. There are some potential downsides though, which I’ll cover in a moment.

If your ring costs more than the minimal amount of coverage that’s included, you would need your agent to add a personal property rider to your existing policy. Again, this would be the case for both homeowner’s insurance and renter’s insurance.

 

Potential Problems with Using a Homeowners or Renter’s Policy

Insuring through an existing policy isn’t always the best option. This type of coverage may protect you from theft or damage, but probably won’t protect you against loss (where you just misplace it), for example. That additional coverage is important for peace of mind. Sometimes, you may suspect theft, but you have no evidence of theft (no signs of forced entry and no police report). Your homeowner’s policy may or may not cover such a situation, but you’d likely have broader and better coverage through a dedicated jewelry insurance policy through a company that specializes in those (I’ll talk more about this option in a moment).

If you need to add a personal property rider because your ring is worth more than $1,000 to $1,500, the cost of that coverage will likely be slightly more expensive than coverage through other channels might be. If you file a claim under a policy that’s connected to your homeowner’s or renter’s policy, it might increase your premiums going forward—which is where this type of coverage could get really expensive!

I once filed a claim against my homeowner’s policy to cover about $6,000 worth of property damage. It was nice to get the check from them, but that payout was followed by years and years of higher premiums. At the end of the day, it felt like I simply got a loan from the company that I had to pay back in installments (higher premiums) over time. What’s worse, is that simply filing that claim labeled me a higher risk, so as I shopped for different providers, they all quoted me higher policy pricing. It was a situation that I couldn’t shop my way out of. I learned through that experience to only use my homeowner’s policy for catastrophic losses (significant damage caused by earthquakes or major storms for example).

Check with your agent to see how a claim against your rider would be handled by your insurer (whether it could potentially raise your rates following the claim). If that’s a possibility, I would personally avoid going this route.

 

Coverage Through a Jewelry Insurance Company

When you insure through a dedicated jewelry insurance company, you separate your ring coverage from your homeowner’s or renter’s policy. That means that if you have to file a claim at some point, that claim won’t affect the cost of your other policy in any way!

My favorite ring insurance company offers really nice benefits. They cover 125% of the value of your ring, for example. That’s important because we see inflation happening all around us. It would be sad to find that you have to replace your ring with something lesser because the cost of an identical replacement has gone higher than the amount you originally insured it for. This also protects you against the risk of a poor appraisal that pegs the value of your ring lower than it should have actually been.

In addition to coverage for physical damage, loss, and theft, they offer coverage for “Mysterious Disappearance,” which essentially means that you have no idea what happened to your ring…it’s just gone and you’re not sure when it happened or how. I love that their coverage has no deductible of any kind. I also appreciate the fact that they allow you to get your repair or replacement from a local jeweler that you trust…rather than having the insurer decide what to send you as a replacement. You can go back to the same jeweler that you originally purchased from to get something truly identical if you’d like!

Fortunately, the process is incredibly simple. It only takes about 3 minutes to get the quote and start coverage online. It’s also very affordable! Most policies are less than $5 a month ($60 a year)! You can review additional information on the benefits they offer and get a free quote, here.

 

Self Insurance

One final option that’s worth a quick mention in self-insuring your ring. If paying for a replacement ring wouldn’t cause much financial turbulence in your life, then self-insuring might be a possibility. This simply means that you’re ready, willing, and able to essentially write a check for a new ring if needed—so you opt to not pay for traditional insurance.

Sometimes some simple math is helpful when making decisions about potentially self-insuring. If you have a $3,000 Moissanite ring that would cost $4.17 a month ($50.04 per year) to insure, for example, it would take almost 60 years for you to end up saving money by self-insuring—if you had to replace the ring even once over the span of those years. That assumes though that the cost of comparable replacement rings stays flat over a 60-year period, which is certainly unlikely. It also assumes that you only have one instance of loss, theft, or damage. If you had more than one instance, self-insurance could end up being many times more expensive.

After looking over some basic calculations, even those that could afford to self insure, often see wisdom in purchasing a policy to protect their ring.

 

Factors That Influence Your Cost of Coverage

The value of your ring and the amount of insurance coverage you’re seeking will be the most basic factors, but your location is also a component of pricing. There are two common-sense factors that location plays into. First, the likelihood of crime. Second, the cost of jewelry where you live. Both crime and the cost of replacement jewelry would likely be higher in Los Angeles, California, than it would be in Huntsville, Alabama for example. Location doesn’t cause wild swings in the cost of coverage, but it can have a mild impact.

The specific materials your ring is made of (Diamond, Moissanite, Sapphire, gold, platinum, etc) will have no real bearing on cost, other than establishing value. The value of your ring will typically be established by an appraisal.

 

Where to Get Your Ring Appraised

Reputable local jewelers are often a good place to go for ring appraisals. You’ll likely pay $50 to $75 to have an appraisal done, but it’s valuable information to have because an independent expert documents the value of your ring, but also so you can know some of the important details about your stone that you might not otherwise be aware of. The appraisal may provide information on the cut, color and inclusions for your specific stones. The unique combination of those details will help you to identify your stones in case of theft, but they will also help you to get the most similar replacement possible if that’s ever needed.

 

How Much Will It Cost to Cover a Moissanite Ring?

I’ll provide some general pricing information—but you can get a quote that’s specific to your exact ring and location here. The process is really quick! Within about 30 seconds, you’ll have your quote and can then decide if it’s a good fit.

In my experience, coverage for most Moissanite rings will hover around $50 per year (roughly $4.20 a month). Your quote may be slightly higher or lower, based on your ring value and location, but I’d guess that it comes in pretty close to that number.

If you have valuable earrings or other jewelry that you’d hate to lose, they can cover those items inexpensively as well!

 

Things to Watch Out For

There are a few potential pitfalls related to insuring your ring. I’ll quickly address them so you know what to look for and ask questions about.

 

Inaccurate appraisals:

Some appraisers frequently overvalue the rings they assess. When that happens, you can end up paying for more coverage than you really need. What’s even worse, is that once a claim is filed, your insurance company may push back on your ring’s value, claiming that the appraisal isn’t accurate.

On the other end of the spectrum, if a ring is undervalued, you may not get a large enough payout to cover your actual replacement costs. The risk of a poor appraisal is one of the reasons that I strongly prefer the insurance company that I linked to above. Their 125% coverage protects you if you should ever find that you didn’t have as much coverage as you ultimately needed in order to be made whole following a claim.

 

Exclusions:

Your homeowners or rental insurance policy has lots of fine print, in fact, all insurance policies do. Those details matter when it’s time to file a claim. Part of the fine print that we often gloss over has to do with exclusions—or the specific scenarios where the insurance company won’t have liability for a claim under the policy. An example might be the exclusion that some life insurance policies could have for extreme activities, like Skydiving. If your policy has that exclusion, and you die while skydiving, they won’t pay a benefit, whether you remember seeing that exclusion or not.

It would be sad to pay for a policy believing that you have coverage, only to learn that there’s an exclusion in your policy that excludes coverage for loss or damage which takes place while you’re traveling abroad. Unfortunately, most people only learn about the exclusions after filing a claim. Understanding the exclusions while your shopping for a policy will help you to ensure you’re getting the best value, and most comprehensive coverage, possible

 

Deductibles:

The initial portion of any loss that you’re responsible to absorb before insurance begins paying on a claim, is your deductible. Most home insurance policies might have a deductible of $500, $1,000, or $1,500 for example. If you were to file a $2,000 claim for your damaged ring, but you had a $1,500 deductible, the insurance company would only end up paying you $500 to help you replace your ring. That might come as a frustrating surprise if you weren’t initially aware.

The price you’re quoted for adding coverage for your $2,000 ring to your homeowner’s policy might seem fantastic until you realize that the only insurance you really have, is the amount that’s the difference between your deductible and the full value of your ring. In light of the small amount of potential payout, you may find that the coverage offered by your homeowner’s policy turns out to be your most expensive option in some cases.

The insurance provider that I linked to above has no deductibles, so you’re never asked to personally absorb any portion of the accepted loss.

 

Getting Your Replacement:

If you file a claim, will you have the option of getting a replacement ring, or simply getting a check? Will you be able to pick the retailer that you purchase the replacement ring from? Will you be able to pick your own replacement ring, or will the insurance company decide, on their own, what they think is most comparable and force you to accept it?

Hopefully, you can see that while price is an important consideration, it certainly isn’t the only consideration. It’s really not even the most one. In order to have real peace of mind, you need to make sure that you won’t have unfortunate surprises when the unthinkable happens.

 

You Shouldn’t Wait Until Tomorrow to Insure Your Ring

Unfortunately, you can’t buy life insurance from the back of an ambulance while you’re racing to the emergency room, and you can’t buy fire insurance once your house is already on fire. Similarly, it’s too late to protect your ring once unexpected loss or damage has taken place.

Procrastination often costs us dearly. We have every intention to take care of dozens of important things “later.” Unfortunately, we often eventually regret not acting sooner.

The process of securing insurance coverage for your ring almost couldn’t be simpler or more affordable. It’s something you should do now, so you can live with greater peace of mind and not add one more thing to your ever-expanding to-do list!

 

In Conclusion

You have numerous options for insuring your Moissanite engagement or Moissanite wedding ring. Get a quote, ask questions, and secure a policy. It’s something you won’t regret!

 

Related Posts:

How Much are Moissanite Rings? | Finding Inexpensive Options

Will Moissanite Go Up in Value? – What it’s Worth Used & Why

It’s Pretty, But Is Moissanite a Good Diamond Alternative?

 

 

Is Moissanite Tacky? | What Friends & Family May Think About It

Is Moissanite Tacky? | What Friends & Family May Think About It

Engagement rings and wedding rings should be special and durable. You want something your partner can be proud of, so as you initially learn about Moissanite, it’s natural to wonder if it might be considered cheap or tacky.

Is Moissanite Tacky? No, despite what well-paid diamond marketing firms work hard to make you believe, there’s nothing Tacky, or shameful, about giving a beautiful Moissanite engagement or wedding ring. Moissanite looks very similar to diamond. It’s incredibly durable, and yet significantly less expensive.

In the paragraphs that follow, we’ll give you all the information you’ll need in order to decide if Moissanite is the right choice for your special ring.

 

What is Moissanite?

Moissanite (which is sometimes referred to as ‘Moissy’ in casual conversation) is an ultra-rare naturally occurring stone that was first discovered in 1893 as a scientist combed the impact site of a meteorite in an Arizona desert. The fragments that were found there were originally misidentified as Diamond. Years passed before the French scientist that made the discovery realized that they weren’t diamonds, but something else—something new. Moissanite was eventually named after the French scientist (Henri Moissan) that discovered it.

Naturally occurring Moissanite is far rarer than Diamonds. Diamonds are mined in countries around the globe. The illusion of scarcity supports high prices, which both create a sense of exclusivity that’s a critical part of the industry’s marketing strategy. Diamonds certainly are difficult to extract from the earth, but they aren’t nearly as rare as we’re led to believe through carefully controlled supply channels.

There are no Moissanite mines where large quantities of the stone are extracted from the earth. It’s most commonly found at meteorite impact sites even today, though tiny fragments of Moissanite are also infrequently found in a few other locations as well. Natural Moissanite is always found in tiny pieces that are far too small for jewelry. It’s often broken up as the meteorite which it was part of makes impact with the earth. Because of this, all Moissanite used for jewelry is recreated in a lab.

Moissanite is incredibly hard, so it was originally utilized as an industrial abrasive agent because diamonds and other gems that might serve a similar purpose were far too expensive. Moissanite’s natural hardness makes it a durable choice for jewelry that can withstand the abuse of daily wear.

Moissanite naturally looks almost identical to diamond, but that doesn’t make it a ‘fake diamond’ any more than having a strong natural resemblance to Julia Roberts makes you a fake Julia Roberts. Moissanite is an amazing stone on it’s own merits, and can be a wonderful choice for a wedding or engagement ring!

 

Does Moissanite Look Strange or Stand Out?

Most Moissanite owners would tell you that their ring stands out in a positive way. Moissanite really sparkles, which catches the eye! I’ve heard many Moissanite owners comment that they’re constantly getting compliments on their Moissanite ring. They sometimes add that they never got so many nice comments about the diamond rings they wore in the past.

Moissanite is typically a clear stone, like diamond (though fancy colored options do exist), so it certainly doesn’t look strange or stand out in a negative sense.

 

How Common are Moissanite Rings?

Moissanite has become much more commonly used over the past ten years or so. Internet search data shows that it’s searched more than many alternatives like Lab Diamonds, Morganite, White Sapphire, and Cubic Zirconia for use in rings. You may have seen many Moissanite rings without even realizing it. Most often, people that aren’t professionals in the industry see a Moissanite ring and assume it’s a diamond ring. Even professionals might have a hard time identifying a Moissanite ring without a closer inspection, and perhaps testing equipment, in many cases.

The use of Moissanite rings is growing rapidly, so If you ultimately decide to go with Moissanite, you’ll certainly be in good company!

 

What’s Most Important to You and Your Partner?

Our tastes and preferences are constantly being shaped by marketing companies that shape our opinions through ads and product placements. It’s a subtle process. We aren’t even conscious of the fact that we’re being manipulated to associate certain ideas and feelings with a particular product. These campaigns aren’t a guessing game or gamble for the diamond industry. It’s an investment, and the marketing firms they hire are masters at programming our biases and impressions to desire their product and to think of all others as a poor personal reflection on us. Too often, we bite and accept the meanings and associates they carefully feed to us.

Did you know that Americans haven’t always given diamonds when they got engaged or married? Prior to the 1930s, other gems were far more common. It was only through heavy marketing campaigns that the tide began turning, and people began associating Diamonds with engagement, marriage, and love. An expectation of a diamond was created over time, but that didn’t happen organically—it was programmed into us by the industry that would directly profit from the shift. They caused us to feel a sense of failure if the diamond wasn’t big enough. They caused us to question if it was real love at all if a diamond wasn’t presented. It’s all nonsense in reality, but many still buy into the conditioning that we’ve received through marketing.

When you choose Moissanite, you get a ring that looks almost identical to a diamond. You also get a stone that’s harder than all gems and stones other than diamonds. Moissanite rings are durable, so they can be worn daily and don’t need to be babied like softer stones. When you choose Moissanite, you save significant money, because the supply of Moissanite isn’t centralized and manipulated. You’ll typically save 85% over the cost of purchasing a similar-sized diamond! That means thousands of dollars in savings that you can apply to paying down debt, a better honeymoon, a down payment on a home, etc.

So what’s most important—having a durable and equally beautiful stone that you save thousands of dollars on or maintaining a self-serving tradition that the diamond industry created in order to build demand and support exorbitant prices?

 

How Durable Is Moissanite

The Mohs Scale of hardness is a comparative scale that essentially ranks materials in order of hardness. It’s ‘comparative’ because it doesn’t measure their hardness as much as it shows us, numerically, which stones are harder than specific types of other stones. From the scale, we learn that Talc has the lowest possible rating at just 1. Diamond (the hardest known rock) is on the other end of the scale, with a hardness of 10. All other rocks fall somewhere in between those two points. The Mohs Scale rates Moissanite between 9.25 and 9.5. That tells us that it’s not as hard as diamond, but it’s still really hard (even harder than sapphires).

That hardness means that Moissanite is scratch-resistant. Most of the light bumps and scrapes that might scare a Cubic Zirconia or topaz won’t blemish a Moissanite. This means that, unlike many diamond alternatives, Moissanite can stand up to the harsh conditions of daily wear without quickly wearing out.

 

Does Moissanite get cloudy over time?

The passing of time won’t cause Moissanite to get cloudy, however, it can accumulate build-up from things like soaps and lotions that can begin to block some sparkle. If that happens, a simple cleaning should restore your ring’s full beauty. The good news is that Moissanite is so sparkly, that it can reflect light flashes through build-up that would leave most other stones looking completely dull and lifeless! That means that cleaning requirements are far more relaxed for Moissy than it often is for other types of rings.

 

How Much Does Moissanite Cost?

The cost of Moissanite will vary, depending on who you’re shopping with, but the equivalent of a 1 carat stone (7mm) typically costs around $300, while a diamond of comparable size would typically cost $3,000 to $5,000. Again, the potential savings are significant!

 

How Can People Tell Moissanite and Diamonds Apart?

In reality, your friends, family, and co-workers would have a hard time telling Moissanite and Diamond apart. A professional jeweler would have an easier time distinguishing the two stones, though they sometimes have to resort to high-tech devices for identification when appearances aren’t distinctive enough.

The quickest way to alert people to the fact that your Moissanite ring isn’t a diamond ring is to go too big with the stone that you choose. You could buy a 3-carat Moissanite stone for a minimal cost, but a 3-carat diamond would likely cost at least $30,000—something your friends, family, and co-workers might know you couldn’t possibly afford. Their immediate assumption with an unusually large stone is that it’s a diamond simulant of some kind (like Cubic Zirconia).

Friend Checking Rings to See if it's Moissanite or Diamond

A one-carat diamond isn’t something that’s unusual for most rings, so if you stick to a Moissanite stone in that range, it’s much less likely that anyone would have reason to assume that it might not be a diamond that you’re wearing. Professionals frequently move the stone under light to observe the sparkles. Moissanite has more fire (light dispersion) than diamonds, which can be one way they distinguish Moissanite from diamonds. Fire presents itself as rainbow-colored sparkles of light that reflect back from the ring when exposed to light. Most of your friends would admire the way your Moissanite ring dances with sparkles, but they wouldn’t know that those sparkles are a little different from what they might observe in a comparable diamond.

 

Should You Let People Think Your Moissanite is a Diamond?

You should never mislead the person that you’re offering a ring to about what it’s made of. If you talk about what Moissanite is before you buy it, hopefully, you’ll get a read on how they feel about it. Like most people, they may be unfamiliar initially, but as they learn more, they may come to appreciate it for its beauty, incredible origins, and savings.

I personally feel that Moissanite is a pretty remarkable stone, and I’m not embarrassed at all for someone to know that the solitaire in my wife’s ring is made of Moissanite, not diamond. Having said that, I also don’t feel that I need to go around proactively telling everyone who sees my wife’s ring that the stone is Moissanite. If they ask, I’ll tell them. If they don’t ask, I probably won’t mention it either. You can handle this in whatever way feels best to you, but again, Moissanite is such an incredible stone, that it’s nothing you should feel ashamed to let others know about.

 

Moissanite Problems

There are a few issues that Moissanite owners sometimes experience. First, when they don’t remove their ring to apply hand sanitizers, lotions, sunscreen, etc, they sometimes experience some build-up on their ring that may dull its ability to sparkle until it’s properly cleaned.

The build-up of the oils and chemicals, mentioned above, can also create a rainbow stain that can be difficult to clean off for some people. The stain can be removed, but it’s sometimes challenging for those that are experiencing it for the first time.

The other issue that’s fairly common, is that Moissanite seems to temporarily take on a grey hue in certain lighting conditions. My wife has seen that happen when her hands are on the steering wheel and she’s driving under a grey cloudy sky. Her Moissanite ring simply reflects the color of the sky, but it looks at the time like it’s actually taken on a greyish tone. Once she gets to her destination and has different lighting in her environment, the ring looks normal again. This illusion makes Moissanite interesting, but it’s nothing lasting that should cause concern.

 

Moissanite Alternatives

If you need something less expensive than a traditional diamond, but ultimately decide against a Moissanite, for whatever reason, you may want to look into either buying a lab-grown diamond or a used diamond ring.

Lab grown, or man made, diamonds look exactly the same as mined diamonds and are equally durable, however, they cost much less. I wrote this article explaining more about the benefits and savings of lab grown diamonds.

You can save money on mined diamonds, and lab-grown diamonds, by buying them 2nd hand through Pawn Shops or sites that act as consignment agents. Specialized sites frequently have rings tested for authenticity and provide greater assurance that you’re getting what you think you’re buying. You can find one of my favorite second-hand retailers here. They also have a good selection of loose used diamonds that you can mount to your own band if you’d prefer that.

 

In Conclusion

A Moissanite ring will serve as a symbol of your love and commitment just as effectively as a diamond ring will. It comes down to which stone has the beauty, durability, and price that works best for you. Buying Moissy isn’t tacky or cheap, it’s smart. It’s frugal.

 

Related Posts:

Will Moissanite Last Forever? | Frugal Family Heirloom Rings

When Does Moissanite Look Fake? | The 3 Main Giveaways

Lab Created Diamond vs Moissanite | Look, Durability, & Cost

 

Is Moissanite Considered Fake? | 3 Reasons Some Say It Is

Is Moissanite Considered Fake? | 3 Reasons Some Say It Is

Moissanite rings look very similar to diamond rings, but does that make them nothing more than diamond knockoffs?

Is Moissanite considered fake? Moissanite isn’t “fake.” It’s a real, naturally occurring, stone. Natural Moissanite is much rarer than Diamonds. Because of this, the Moissanite in all jewelry is lab-created. Moissanite looks very similar to diamond, but this doesn’t make Moissanite a fake diamond—or diamond a fake Moissanite.

Why do some people refer to Moissanite as fake? I’ll explain some of the more common reasons below.

Is Moissanite a Fake Diamond?

Diamonds peddlers (and sometimes those that paid way too much to purchase a diamond…and want to justify the decision) occasionally refer to Moissanite as fake (usually implying that it’s a ‘fake diamond’). The label “fake,” understandably, doesn’t sit well with many people that are shopping for a ring to mark an important occasion in their lives. Those that throw the term around recognize this, which is, of course, why they do it.

There are three very common reasons that critics of Moissanite often use to justify claims that it’s fake.

  1. Moissanite is made to look like diamonds
  2. Moissanite is a manufactured stone
  3. It isn’t always presented as Moissanite

I’ll provide more context for each of these claims and address them in the paragraphs that follow.

Moissanite is Made to Look Like Diamonds

Again, Moissanite is a naturally occurring stone, but it’s rare—far more rare than diamonds. Moissanite was originally discovered in 1893 by French scientist Henri Moissan. Henri was investigating the site of a meteor impact in the deserts of Arizona. During his exploration of the area, he found some small crystal fragments that he believed to be diamond. It wasn’t until several years later that he discovered that they were something entirely different than diamond. The stone was eventually named in his honor.

Interesting, right? Moissanite naturally resembles diamond. The fact that the two look so similar is no reason to refer to Moissanite as a fake version of the other. In reality, they’re just two distinct stone types that have some level of commonality in terms of look and durability (yet they’re very distinctive in other areas).

In another article, I referred to Moissanite and Diamond as doppelgangers (two people that almost look like identical twins, but who aren’t related to each other).

Alligators and Crocodiles look almost indistinguishable to those that haven’t learned the physical characteristics that distinguish them. Just because the two reptiles have a lot in common and look fairly similar doesn’t mean that a Crocodile is a fake Alligators, or that an Alligator is a fake Crocodile.

Is Moissanite Considered a Fake Diamond

This same scenario applies to Moissanite too. It does look similar to diamond, but that doesn’t make it fake. White Sapphire can also look similar to diamond, but here again, it’s a natural stone that happens to somewhat resemble diamond (the same way that alligators and crocodiles resemble each other without being identical).

Moissanite is a Manufactured Stone

I mentioned earlier that Moissanite is much rarer than Diamonds. We don’t find large deposits of Moissanite in pockets around the globe that we can continue mining for years (as we do with diamonds. In fact, Moissanite has primarily been found at the site of meteor impacts. The force of the impact typically ensures that only small fragments remain. In the extremely rare instance where naturally occurring Moissanite has been discovered on earth, it’s been found in very small sizes and quantities.

Because Moissanite is a fascinating, functional, and beautiful stone that’s so hard to find naturally, we’ve been creating it in labs for many years. We first started manufacturing it in 1903 so we could use the stone as an abrasive for manufacturing. Moissanite is incredibly hard and much less expensive than other alternatives at the time.

Today, many types of stones are created in labs around the globe. Diamond is another lab-created stone that’s growing in popularity today. The diamonds that are manufactured are made of carbon. They aren’t fake diamonds. They’re real diamonds (in every sense of the word), and have the exact same characteristics as diamonds that were formed in the earth.

As you can see, being lab created doesn’t make a given stone ‘fake.’ Moissanite wasn’t imagined and made up to look like diamonds—it’s a real stone with its own qualities, characteristics, and history.

It Isn’t Always Presented as Moissanite

Because Moissanite and Diamond look so similar, it’s definitely possible for someone to assume that the Moissanite ring you gave them is a diamond ring if you don’t inform them otherwise. Disclosure and honesty are especially important when you present a ring to someone you care about to mark a special moment in the relationship.

If you propose with a Moissanite ring, for example, you really SHOULD find an appropriate way to tell them. The fact that it’s a Moissanite ring doesn’t have to be said before opening the box, while you’re still on one knee, or before they answer your proposal, but you should be open and transparent with the information. Sooner is probably also better than later.

Please don’t get me wrong, this disclosure isn’t an apology. Moissanite is an interesting and impressive stone in its own right. There’s just no need to pretend that a Moissanite is anything other than what it is. Moissanite truly ISN’T a fake diamond. You can be open, honest, and proud of your ring for what it is.

While we’re on the subject of appropriate disclosures, I should mention that Moissanite isn’t intentionally sold by reputable jewelers as diamond—it’s sold as Moissanite. I say ‘intentionally’ just because it’s sometimes hard to tell the two apart without specific testing. I recently wrote an article describing the type of testing and instruments that can be used to distinguish diamonds from Moissanite.

It’s easier for dishonest people to take advantage of unsuspecting buyers on sites that connect private party buyers and sellers (online auction sites, for example). I would exercise real caution when purchasing ANY stone from an individual seller (even through online platforms that you’re familiar with) or online retailers that you’re unfamiliar with. The larger, more established, and more reputable a retailer is, the more certain you can be, that you’ll get what you paid for.

Yes, there may be some situations where Moissanite isn’t disclosed to be Moissanite. When that happens, people frequently believe the stone to be diamond. That clearly shouldn’t happen. When it does, it doesn’t mean that Moissanite is a ‘fake’ stone— it means that people are sometimes dishonest. Again, they may try doing the same thing with a stone like White Sapphire or a number of other similar stones.

How Does it Moissanite Compare to Diamond?

I’ve mentioned several times that Moissanite and Diamond have both common and distinctive characteristics. I thought it might be helpful to quickly highlight some of those issues so you can better understand the similarities and differences.

Moissanite vs Diamond: Hardness

Both Moissanite and Diamond are very hard stones, but they aren’t equally hard. Diamond rates at 10 (the highest score) on the Mohs Scale of Hardness, while Moissanite comes in at 9.25.

The numerical between those two seems small, but the actual difference in hardness is actually pretty significant. Diamond is much harder than Moissanite. That extreme hardness is both good and bad. On one hand, it means that diamonds are incredibly scratch resistant. On the other, it creates a major vulnerability that you’ll learn about in the next section.

Moissanite vs Diamond: Toughness

Hardness and toughness are not the same things. Hardness has to do with scratch resistance. Toughness essentially has to do with break resistance. The harder materials become, the more brittle they get. Diamonds are therefore very resistant to scratches, but also fairly susceptible to cracking or breaking.

My younger sister once had her diamond ring fall off a counter onto a tile floor. As she picked up the ring and examined it, she found that the stone had fractured all the way through.

Because Moissanite is less hard, it’s also less brittle. This makes Moissanite tougher than diamond (less likely to break as the result of an impact).

Moissanite vs Diamond: Durability

Hardness and toughness are both factors that play into durability. Because of that, it’s really hard to say whether diamond or Moissanite is the more durable stone overall. Fortunately, both stones are durable enough to be considered ‘forever’ stones, which means they are capable of being used as family heirlooms, that get passed down from generation-to-generation.

Moissanite vs Diamond: Sparkle

Moissanite is capable of displaying far more sparkle (particularly colorful sparkle—commonly referred to as ‘fire’) than diamond can. This is one of those characteristics that is naturally different between the two stones. Some absolutely LOVE all the additional sparkle. It makes the ring look so vibrant and tends to draw lots of compliments!

When it comes to sparkle, Moissanite is pretty low maintenance. Some stones start to look muted and dull pretty quickly as they collect dirt from daily wear. Moissanite surpasses diamond, and most other stones, in its ability to sparkle right on through some pretty substantial grime.

Moissanite vs Diamond: Cost

The cost difference between Diamond and Moissanite is significant. A 1-carat diamond will likely cost at least 10 times as much as a Moissanite stone of the same size.

A Moissanite stone of that size will cost $300 to $600. A 1-carat diamond of reasonable quality will typically cost $5,000 or more.

Moissanite vs Diamond: Insurability

Both stones are equally insurable. I wrote an article discussing the options and costs for insuring a lab-grown diamond ring. The same options and approximate costs would also be applicable to Moissanite rings, so that post may be worth reviewing if you’d like to understand your options a little better.

One of the benefits of purchasing a ring with a lower cost stone (like Moissanite), is that you may not need to purchase insurance coverage because the cost of replacing the stone may be low enough that you can essentially self-insure. That saves you money that you might otherwise have to pay every month to cover a more expensive ring.

Moissanite vs Diamond: Resale

All used rings are going to sell at a discount. No one wants to pay anything close to retail for a used right—even if it’s in ‘like new’ condition. The size of the discount that’s required to sell your ring will depend on many factors. There are a couple of important differences to keep in mind when comparing Moissanite and Diamond.

First, you risk a lot less when you buy a Moissanite stone. That reality certainly runs against the grain of the beliefs that advertisers have tried to instill in us over the years. We’re led to believe that the diamonds in our engagement rings and wedding rings are an investment of some sort—that hold their value and even appreciate. Unless you’re buying a truly rare diamond (sizes and colors that typically cost hundreds of thousands of dollars or more) it’s all really fiction.

If you purchase a diamond for 6,000 and have to sell it used for a 50% discount, you’ve lost $3,000. If you purchase a Moissanite stone for $600 and have to sell it for a 70% discount, you would only lose $420 in total. That’s why I say you risk a lot less when you purchase Moissanite. You could essentially toss your Moissanite stone in the garbage and lose A LOT less money than you would after SELLING your diamond ring.

I mention that just to highlight the issue, but in reality, there’s no reason that you wouldn’t be able to sell your Moissanite at a discount that’s similar (and most likely even less) than the discount you would have to offer in order to sell a diamond.

I evaluated a number of used diamond rings and moissanite rings that were being offered for sale in my area to figure out the average discount that was being offered on each. I outlined the results in an article titled Will Moissanite Go Up in Value? Sellers are, naturally, only going to discount as much as they need to in order to draw buyers to purchase their ring instead of a new one, so it’s interesting to get some insight into how low they need to go to accomplish that.

In Summary

Moissanite is not a ‘fake’ stone—and certainly isn’t a fake diamond. It’s a naturally occurring stone that’s been reproduced in laboratories since the late 1800s. Natural Moissanite is rare on earth, but it also exists in space and has often been found at meteor impact sites (which is where Moissanite was first discovered).

Moissanite does happen to look very similar to diamond. While it isn’t quite as hard as diamonds, it is tougher. Moissanite is a durable “forever” stone that’s capable of lasting for generations. Couples that can’t, or don’t want to, spend the kind of money that diamonds demand, often save 90% on the cost of their stone by choosing Moissanite! Years later, many tell me that they couldn’t be happier and would make the same decision all over again!

Related Posts:

How Much are Moissanite Rings? | Finding Inexpensive Options

Will Moissanite Pass a Diamond Tester? | Best Test Options

Will Moissanite Last Forever? | Frugal Family Heirloom Rings

Is Moissanite Better Than CZ? The 5 Facts You Need to Know!

Is Moissanite Better Than CZ? The 5 Facts You Need to Know!

Moissanite and Cubic Zirconia are both diamond alternatives that can look gorgeous and cost significantly less than a similar-sized diamond would. Even though Moissanite and CZ have those things in common, they certainly aren’t the same in many other areas.

Is Moissanite better than CZ? Moissanite is definitely the better option if your primary concern is durability. Moissanite is significantly harder than CZ. That hardness means added scratch resistance. If your primary concern is cost, then Cubic Zirconia may be the better choice because it’s significantly less expensive. 

More than likely, you’re not shopping with just one characteristic in mind. You probably want the most durable ring you can get at the best price you can find. In the remainder of this article, I’ll share information that will help you determine whether Moissanite or CZ is the best fit for you, based on your unique needs.

Moissanite vs CZ: Scratch Resistance

Mohs Scale of Hardness is a relative scale that illustrates which stones are harder or softer than other stones. It essentially ranks stones from hardest to softest and applies a numerical rank that helps you to understand where they fall in the hardness ‘pecking order’.

Diamond is the hardest stone known to man, so it has the highest rating on the scale (10). Talc is the softest stone on the scale, with a rating of just 1. Other stones fall somewhere in between the two extremes. Moissanite is definitely considered a hard stone. It has a score of 9.25 to 9.5, making it one of the hardest stones available for rings. At a score of 8 to 8.5, Cubic Zirconia isn’t in the same league as Moissanite when it comes to durability. CZ is far from the softest stone that’s used as a diamond alternative, but it’s not nearly as durable as Moissanite.

The numerical difference between 8 and 9.25 may not seem like much, but the difference in their actual hardness IS significant! Remember, that The Mohs Scale of Hardness is a RELATIVE SCALE. This means that the only thing the numbers clearly communicate is WHETHER a particular stone is harder or softer than another stone. The numbers can’t convey HOW MUCH harder or softer the other stone is. Even jumping from an 8 to 8.5, for example, could represent a HUGE difference in the actual hardness between two given stones.

With that context in mind, the actual difference in hardness between Moissanite and Cubic Zirconia is significant when it comes to the longevity of your ring. Hardness directly equates to scratch resistance. The harder your stone is, the less likely it is to scratch when your hand comes in contact with other objects and surfaces in your everyday environment. By contrast, the softer your stone is, the MORE likely it is to scratch!

This means that it’s much easier to maintain the beauty of your Moissanite stones, over time, than it would be with CZ stones in comparable pieces of jewelry. If durability is one of your primary concerns, but you don’t want to splurge on a much more costly diamond, you may want to stick with something like Moissanite!

Fact 1: Moissanite is significantly harder than CZ, which means it’s going to scratch far less easily.

Moissanite vs CZ: Sparkle

Both Moissanite and Cubic Zirconia are known to throw off a lot of sparklebut which is BETTER? If you’re the type that just can’t get enough sparkle, Moissanite is your best bet!

The two primary elements of the sparkle effect are fire (colorful flashes of light) and brilliance (flashes of white light). Moissanite outperforms CZ in both areas (it even outperforms diamonds in this area).

Comparing Components of Sparkle

Type of Stone
Brilliance
Fire
Moissanite:
2.65
.104
Cubic Zirconia:
2.17
.060

One other important consideration of sparkle, is how well a stone tends to sparkle through dirt and grime. Some stones get muted and dull-looking very quickly. CZ tends to be affected by buildup from dirt and oils much faster than Moissanite. While it’s a good idea to keep your Moissanite clean, it’s known to be a low maintenance ring that continues to sparkle like crazy, even through the kind build-up that dulls other rings!

Those that own Moissanite rings will often tell you that they can’t keep their eyes off all the flashing white and colorful bursts of sparkle they constantly see as they move their ring under light.

Fact #2: Whether both are clean or dirty, Moissanite out performs CZ in sparkle.

Moissanite vs CZ: Retaining Facet Shape

Center Stones are carefully cut with very precisely positioned surfaces. Both the flat surfaces (Facets) and the ridges in between those facets help to create the sparkle effect. If the facets, or ridges in between facets, are damaged, it could seriously inhibit the stone’s ability to sparkle.

Unfortunately, CZ isn’t hard enough to hold it’s shaping indefinitely. As rings are worn daily, they come in contact with various things that can wear down softer stones—like Cubic Zirconia. This means that over the years, the ridges in between facets can start to become rounded instead of having crisp and defined edges. When you compare a new CZ stone against a new Moissanite stone side-by-side, the cuts all look similar. It’s hard to imagine that the two stones could wear so differently over time—but they do.

Ridges wear down on Cubic Zirconia

That change has a major impact on the look of the stone. The stone that once dances with sparkle starts to look dull and lifeless. Moissanite is hard enough to hold its angles and edges despite years of abuse from daily wear.

Fact #3: The ridges between facets will wear down and round over time on CZ. Because Moissanite is significantly harder, it retains its original shape over time.

Moissanite vs CZ: Anticipated Life Span

Because of the difference in hardness between these stones, their anticipated useful lifespan is quite different. A Cubic Zirconia will typically last 3 to 10 years before needing to be replaced—depending on how frequently it’s worn and how carefully it’s protected. Of course your CZ stone won’t turn to powder, or fall off your finger, if you wear it longer than the approximate useful life mentioned above—but after years of wear, the stone often looks dull and tired. It doesn’t sparkle like it once did, and surface scratches may be visible.

A Moissanite stone, on the other hand, should be able to last for many decades. Like diamonds, Moissanite is considered a ‘forever stone’. That essentially means that it’s durable enough to be an heirloom piece that’s handed down to future generations.

Being a ‘forever stone’ doesn’t mean it’s indestructible—just that it’s destruction resistant. Diamonds are the hardest stone on earth, but they can still crack, break, shatter, or even scratch, given the right circumstances. Moissanite is similar. You don’t have to baby it as much as softer stones, but you need to exercise some reasonable caution. If you go white water rafting, for example, it would be a good idea to remove your ring, whether it’s Moissanite, Diamond, or CZ.

Fact #4: The typical useful life of CZ is 3 to 10 years, while Moissanite can last through multiple generations.

Moissanite vs CZ: Resale Value

When you sell a used ring, expect to take a loss. That’s going to be the case whether you’re selling a diamond, a Moissanite, or a CZ ring. If your buyer wanted to pay retail, they would probably prefer to purchase a new ring from a jeweler. Used ring buyers are looking for a deal (savings).

Having said that, CZ is typically inexpensive to purchase new, so it’s essentially valueless on the used market. People can afford to purchase a new CZ, so selling a Cubic Zirconia used is hardly worth anyone’s time in most cases.

Moissanite is more expensive. A one carat Moissanite stone typically costs $300 to $600 depending on the color and where you purchase it. I did some research for a recent article, comparing the resale value of Moissanite to the resale value of used diamonds. I compared real second-hand rings that were being offered for sale in my area to compile that data. You can review my findings HERE.

Fact #5: Moissanite resells for more, but also costs much more to purchase new. CZ costs very little and isn’t as durable, so it can sometimes be harder to resell. 

Summary

Moissanite is certainly the far more durable stone that can symbolize permanence for engagement rings, wedding rings, and anniversary bands. It’s the better choice if you’re looking for something that’s as diamond-like as possible without having to cover the hefty cost of diamonds.

CZ can be beautiful in rings. While it isn’t as scratch-resistant or long-lasting as Moissanite, it’s still the right choice for some couples. Cubic Zirconia can allow couples with extremely tight budgets to get a ring that should last, and look beautiful, for several years without incurring ring debt. Several years later, once the couple is better prepared for the expense, they can upgrade to something like Moissanite or a diamond if they want to. Another affordable option, is to simply replace the CZ stone with a new CZ stone when the stone starts looking too worn. There’s nothing really wrong with that approach either.

For couples that can afford just a little more, Moissanite offers incredible value. It can provide you with a forever stone, and lots of beautiful sparkle, at a frugal price.

Related Posts:

When Does Moissanite Look Fake? | The 3 Main Giveaways

Why Buy Cubic Zirconia Engagement Rings?

Which is Better Moissanite or Cubic Zirconia?

 

Does Morganite Get Cloudy? Can it be Avoided or Fixed?

Does Morganite Get Cloudy? Can it be Avoided or Fixed?

If you’ve been wondering how well your ring might hold up over time, you may have wondered, or worried, about the haze or cloudiness that some stones can take on as a result of age or exposure. Will the same type of thing happen with your ring? You, no doubt, want your Morganite ring to always look as warm, clear, and vibrant as the day you first slipped it on?

Does Morganite get cloudy? Morganite can get cloudy and dull as it accumulates oils and dirt from your daily environment. A careful cleaning should be able to remove that film to restore its color and clarity. Cleaning needs will vary, but If you’re wearing the ring daily, it wouldn’t be unusual to clean it every week or two.

The accumulation of dirt and oils is one path to a cloudy appearance, but there are other ways that Morganite can attract a milky haze. I share more information on what cloudiness is, how to avoid it, and also how to fix it in the paragraphs that follow.

When Good Stones Go Cloudy

Morganite isn’t the only stone that can look cloudy under certain circumstances. It can really happen to any stone—though some tend to cloud faster than others for reasons I’ll explain a little later.

Early Cubic Zirconia is an example of a manufactured stone that commonly clouded with age. Manufacturers went in search of a solution and found stabilizing agents that they were able to incorporate to address the issue. Today, Cubic Zirconia isn’t known for consistently clouding, however, corners may have been cut on some of your cheapest CZ stones (like using less effective stabilizing agents, or skipping them altogether) to save money. On the surface, the purchase price may look attractive, but the clarity of such a stone won’t endure for long. Without the right type and quantity of stabilizers in it, the CZ stone could end up cloudy.

So, why is Morganite any different? Morganite isn’t a manufactured stone—it’s mined from the earth (so no stabilizing agents aren’t added or needed). It’s a naturally stable stone that should not experience clarity changes as the direct result of the passage of time. 

What Makes Morganite Cloudy

There are several primary factors that could cause Morganite to occasionally take on a cloudy appearance over time.

Buildup on the surface of the stone: Again, build up most frequently comes from the natural oils on your skin, as it combines with the dirt that your hands come in contact with every day. Some of that dirt is on things you pick up or touch, and some is simply floating around in the form of dust. It’s pretty unavoidable if you’re wearing your ring regularly.

Hand creams and lotions can be a source of additional oils, speeding the process of build-up. At a minimum, you should remove your ring until any topical treatments have been rubbed in well.

Water can also lead to buildup on the surface of your Moissanite. Most water has dissolved minerals in it. After the water has evaporated and the surface has dried, a coating of minerals can get left behind.

These mineral deposits are commonly referred to as ‘hard water buildup.’ Hard water deposits can obstruct light flow for your ring, which can change its appearance, making it feel more dull and lifeless.

Fortunately, the cloudiness that comes from these forms of buildup is usually temporary. A good cleaning should be able to remove the accumulated residue.

One further risk related to hard water buildup is that any mineral grit that settles on the surface of your ring could potentially cause scratching over time as your ring rubs against materials or objects that cause friction between the mineral grit and your Morganite stone. Carefully cleaning your Morganite ring, on a regular basis, helps to protect your ring from both types of danger.

Contact with harsh chemicals: Certain chemicals could potentially react with Morganite in a way that leaves a white haze on the stone. Depending on the nature of that reaction, the cloudiness could be a temporary inconvenience that just requires a good cleaning…or a permanent marring of the stone.

Because of these risks, it’s best to simply remove your ring before handling chemicals. 

Even diamonds can get damaged through contact with harsh chemicals, so it’s wise to be careful—regardless of the type of stone that your ring contains.

Heavy scratching: When I say heavy scratching, I mean multiple scratches that could eventually combine to block light from entering or moving about the stone. Light flow is a critical component of sparkle.

Scratches are convenient places for dirt and oils to accumulate and hide. The effect of overlapping scratches, combined with the harboring of dirt and oils, can rob your stone of the sparkle it once displayed with ease and abundance.

Yes, Morganite is considered a hard stone, but it’s softer than some alternatives like Sapphire or Diamond. There are things you can do to reclaim your ring and restore its’ original beauty if it gets overly scratched through years of use. I’ll address those potential remedies below.

How to Keep Morganite From Getting Cloudy

My Grandma used to say that, “an ounce of prevention is worth a pound of cure.” It essentially means that a little precaution is a lot less expensive (and painful) than the effort to fix something once it’s broken.

In this section, we’ll focus on simple things you can do to protect your ring (prevention). In the next section, we’ll talk about the things you can do to reclaim (cure) a cloudy ring. Grandma’s wisdom is certainly true when it comes to Morganite care as well—it makes a lot more sense to focus our effort and attention on preventing damage, rather than correcting it. 

The easiest way to protect your ring from damage, is simply to remove it before doing, or handling, things that could potentially harm it. That may sound easy, but it’s often not top-of-mind or convenient. This simple solution takes awareness and discipline.

Remove Your Ring Before…

  • Yardwork
  • Engaging in some hobbies or recreation
  • Cleaning with chemicals
  • Showering
  • Washing Hands
  • Swimming
  • Using hand lotion
  • Applying hand sanitizer
  • Etc.

“Etc.” ends that list, because it’s impossible to make a list that covers every potential risk or scenario—individual interests and circumstances vary a lot!

If you need to remove your ring for long periods of time (as you travel abroad for example) it might make sense to get an inexpensive alternate ring to wear instead of risking potential damage to your Morganite ring. Beautiful rings with a Cubic Zirconia center stone, for example, can often be purchased for $100 or less.

You can wear your ‘alternate ring’ when it’s simply too dangerous to risk wearing your Morganite. Here’s an example of an inexpensive ring that might work well for this type of application. Here’s another good example.

Some people really struggle, emotionally, with the idea of removing their ring—even for a little while. They may feel like they’re breaking a commitment to their partner, or they don’t want to unintentionally send a signal that they might be ‘available’. Some people are also just more comfortable with a ring on their ring finger after years of wearing one. An inexpensive alternative ring is a great, and affordable, solution for all of those circumstances.

Finally, Clean your Morganite regularly to keep it looking its best—and to clear away any grit or residue that could potentially lead to scratching. I’ll talk about HOW to safely and effectively clean a Morganite ring in a moment.

Fixing a Cloudy Morganite Ring

Again, when Morganite starts to take on a cloudy appearance, it’s typically because the ring is dirty, or because of heavy scratching. I’ll address effective methods for cleaning your Morganite ring in the next section.

If scratches are causing a cloudy appearance, you’ll need to have a jeweler repolish the stone for you. The polishing process will make your Morganite look like new again—but be aware that the stone will be slightly smaller after the procedure. You probably won’t be able to visibly notice a size difference, but if you repolish too many times, the stone may no longer fit in its original setting. If that eventually happens, you might need to get a replacement stone…or buy a new band with a smaller setting that fits the new size of your original stone a little better.

Typically, repolishing is only done a time or two over the life of a particular stone. If that’s the case for your ring, you likely won’t have any issues with the stone no longer fitting securely in its original setting.

How to Clean a Cloudy Morganite Ring

The simple use of warm water, mild dish soap, and a soft toothbrush can work wonders! I like this method best because it’s simple, gentle, and inexpensive.

Morganite can be temperature sensitive, so you want to avoid extremes. Moving a Morganite stone from a hot state to a cold state too quickly (or vice versa) could actually cause it to crack. Warm water is a safe middle ground.

Start by dipping a soft infant toothbrush in your bowl of soapy water. Gently scrub your Morganite with the bristles of the soft toothbrush, ensuring that you thoroughly work around each prong and the underside of the stone if it’s accessible.

Infant toothbrushes can often be purchased at a dollar store in many areas. If you don’t live near a dollar store, you’ll likely still be able to find them for only a little more elsewhere.

After cleaning the stone to your satisfaction, rinse it well in warm, or cool, water, and then dab, or blot, it dry with a soft towel.

The final step is to use the cool setting on a hairdryer to fully dry all the cracks and crevices that the towel can’t reach.

As a slight variation on the simple process described above, some have found that adding just a little vinegar to the soap and water mixture described above, seems to help cut through the grime better—and keep their ring clean longer—than soap and water alone.

Vinegar can be a very effective cleaning agent, in fact, many families that favor more natural cleaning products use diluted vinegar, instead of chemical-based spray cleaners, to clean their house.

As a final word of caution, be careful about how you clean your Morganite. If you use diamond cleaner—or a variety of other chemical solutions, you might just damage your ring.

Morganite is softer and more porous than diamonds, Sapphires, and rubies. Some of the cleaners that may be safe and effective for other gems, could potentially harm Morganite. Safe, simple, and effective is best. Warm water and mild dish soap is a good balance of all three.

In Summary

Morganite is a stable stone that won’t go cloudy as a result of age alone. Getting dirty, collecting a heavy covering of overlapping scratches, or a chemical reaction are the most likely causes of Morganite clouding. Fortunately, most of those issues are correctable. A good cleaning or re-polishing the stone can make most Morganite look good as new.

If you take precautions with your Morganite ring, it should look as beautiful as the day you got it for many years!

Related Posts:

Are Morganite Rings Durable? How Long Can They Last?

Can Morganite Get Wet? The Main Dangers & Key Precautions

Are Morganite Rings Expensive? Cost Per Carat vs Diamond

Can Morganite Get Wet? The Main Dangers & Key Precautions

Can Morganite Get Wet? The Main Dangers & Key Precautions

Your hands come in contact with water many times every day. If you want to keep your Morganite ring looking as beautiful and new as the day you got it, you’re probably wondering …

Can Morganite get wet? Water can dull or damage your Morganite ring, especially when exposure is frequent and prolonged. Morganite doesn’t discolor or fall apart as an immediate result of water contact, but regular exposure can have an impact over time. It can cause loss or damage in a variety of ways.

Different types of water can affect Morganite in different ways. In the paragraphs that follow, I’ll explain how water from various sources can potentially cause damage to your ring. I’ll also share information on how you can safely use water to keep your ring looking bright and new.

Protecting your Morganite Ring

The hardness and the toughness of your stone are at the heart of durability. I won’t go into any major detail about either aspect right now, because I have other articles that address each of those areas more deeply.

To quickly summarize, hardness has to do with scratch resistance. The harder a stone is, the less likely it is to get scratched. As scratches accumulate, they can rob a stone of its ability to gather and channel light, making it look old and tired. Diamond is the hardest gem known to man. It has incredible scratch resistance. That doesn’t mean that it CAN’T be scratched, but it isn’t easy for your diamond ring to get scratched up as you go about your daily routine because it’s so hard.

Some stones, like diamonds, are extremely hard, but not equally tough. Toughness has to do with their ability to absorb impacts and pressures without breaking or shattering. Diamonds are so hard that they become brittle. If a diamond falls onto a tile floor, it’s very possible that it will crack or break. I’ve seen it happen. Whether a particular diamond beaks when it falls on a hard surface has to do with a lot of factors (how far did it fall, where was the point of impact, the nature and placement of inclusions, etc). My point is, that hardness isn’t all that matters when it comes to durability.

All rings have to be handled with care. While diamonds are hard, they certainly aren’t indestructible. Protecting your jewelry from damage DOESN’T mean that you have to leave it in your jewelry box constantly. Here are a few simple steps you can take to protect your ring from damage.

  • Keep your Morganite ring away from other rings (they can scratch each other if they make contact).
  • Be present and aware. Try not to bump or brush against things accidentally as you go about your daily routines.
  • Keep the ring away from water as much as possible (take it off first).

We’ll talk about the specific threats that water from different sources can pose in a moment. Before diving into that, I want to quickly point out that some diamond enthusiasts might argue that diamonds are worth their high cost because of their incredible hardness (durability). That has SOME validity on the surface, but there are a couple of important points that should be considered:

  1. Diamonds also aren’t indestructible.
  2. You can easily purchase multiple Morganite stones for the cost of one diamond. This means that you probably can’t save money by purchasing a diamond—based on durability logic.

Some might contend that they DON’T WANT a replacement stone (for sentimental reasons). I get that—everyone will need to make their own decisions on this issue. In my mind, a replacement stone from your spouse is just as special as the original stone they provided for your ring. Both symbolize the same commitment, and can do it equally well.

This is all just contemplation of a ‘worst case scenario,’ it’s hypothetical, but again, if your Morganite got damaged at some point, you could buy another (maybe even a stone with better coloring) and STILL save a boat-load of savings over purchasing a diamond center stone instead.

The Dangers of Treated Water: Sinks, Showers, Bathtubs, Hot Tubs & Swimming Pools

The treated water that your hands come in contact with as you shower, wash your hands, or swim, could damage your morganite over time. The biggest risk comes from chemical exposure. Chlorine is added to the water you shower and wash your hands with. It’s also added to most pools and hot tubs to help keep the water sanitary.

Can you wear Morganite in a pool? It’s really not a good idea, but the ring won’t instantly fall apart either. Even diluted Chlorine probably isn’t great for your Morganite stone, but the bigger problem is the impact that Chlorine has on some metals—like gold. Chlorine can attack and eat gold. It frequently weakens the prongs on these rings, causing them to bend or break more easily. That’s not an impact that you’re likely to see right away, it takes repeated exposure over time before any damage will likely be noticed. 

The toll that Chlorine takes on gold isn’t visible to the naked eye—it’s microscopic. Because of this, some people believe their ring isn’t being harmed. They may continue believing that until the day they finally lose their center stone because a prong bent or broke. Even then, they may have trouble connecting the loss to water exposure because the damage was so gradual.

A good friend of mine found a large diamond on the floor in an airport. There are lots of potential reasons that prongs holding that diamond may have failed, but I wouldn’t be surprised if damage from repeated water contact was a contributing factor.

In addition to the damage that’s sometimes caused by Chlorine, you can also encounter mineral deposits from hard water that form on the surface of your Morganite. These deposits are simply dissolved minerals that are in our tap water. They get left behind as the water dries. They can leave your stone looking dull and lifeless until it gets cleaned well.

A related risk that can also make your Morganite look dull and muted, is build up from the various soaps, shampoos, and conditioners that we use while showering or washing our hands. It’s a really good idea to remove your ring before bathing, showering, soaking, or washing your hands. Some people really don’t want to take their rings off. They feel like they’re breaking a commitment to continually wear their ring, they’re concerned that they might forget the ring and leave it behind somewhere…or the extra step just sounds inconvenient.

Is it Common to Remove Your Ring Before Showering?

Some feel like it’s overkill to remove their rings before doing common practices like washing their hands, washing dishes, or showering. It’s a polarizing issue. Some habitually remove them, others never do. Which camp are you in? Want to hear how others approach the issue? I published an article recently where I share findings from research that I did on this issue. Take a quick look—you may find the data interesting!

The Dangers of Untreated Water: the Ocean, Lakes, Rivers, & Streams

There’s no Chlorine in lakes, rivers, streams, or the ocean, so what’s the real danger of water in those environments? Simple contact with water won’t cause your stone to fade, crack or break. The common dangers can be quite different for these outdoor water sources in some cases.

Salt: Saltwater can be hard on some ring components. Like Chlorine, it’s especially hard on gold. Repeated exposure can damage your rings over time. Here too, the damage isn’t immediate or visibly noticeable, so it can be unnoticed and overlooked for quite some time. The impact of the damage often comes first in the form of weak or broken prongs. Fragile prongs mean that you could potentially lose your Morganite at some point in the future. Because of those risks, it’s best to remove your ring before jumping in.

Woman Swimming in Ocean as She Wonders Will Water Hurt Morganite

Shrinkage: Water can make your ring fit differently for a while. When our hands soak for long periods of time, the diameter of our fingers can change. That happens because our skin starts to shrivel with prolonged exposure, and because cold water causes some temporary shrinkage.

If your ring fits more loosely in the water, there’s a greater chance that your ring could slip off and get lost.

Motion: As you splash and play, rapid movement of water around your stone could potentially loosen the setting.

Outdoor water is also often hard to see through (it’s murky), so you sometimes run the risk of bumping or brushing against something hard, like a rock, a shell—maybe even a watch that someone near you is wearing. That contact could potentially scratch or loosen your Moissanite.

Between poor visibility, silt or sand, and the movement of water, If your stone happens to slip out of its setting while you’re in the water, chances of recovery are slim-to-none.

Spotting: The movement of water in Rivers, Streams, and the Ocean break things down and then move that debris along in a tide or current. Dissolved minerals can dry to form mineral deposits on the surface of your Morganite stone. The deposits only mute the look of your ring until it’s cleaned—but they can also leave a grit on the surface of the ring that could potentially lead to scratches.

How to Make Morganite Sparkle

Over time, the natural oils from your skin can combine with dirt and dust in your everyday environment to create a film that coats the surface of your ring, making it look dull. The film blocks light from entering and moving around inside the ring the way it normally would. Removing the grime isn’t difficult or expensive. All you really need is water, mild dish soap, a soft toothbrush, and a clean towel.

Add a few drops of dish soap to a small bowl of warm water. Dip your soft-bristled toothbrush in the water and then scrub the surface of the Morganite very gently with it. Be careful to get the brustles under the stone and around all prongs as well as possible. When you’re done scrubbing, rinse the ring well, and then dry thoroughly by dabbing carefully with the towel. If possible, it’s a good idea to use a blow dryer on a cool setting to ensure that the ring is fully dry. Without the blow dryer, It can be very difficult to dry the crevices around the prongs and the area beneath your center stone.

In Summary

Morganite can be a wonderful addition to your ring. It’s beautiful, hard enough for daily wear, and distinctive. In order to keep it looking it’s best for the long term, it’s best to avoid contact with water—except when you’re cleaning it. When it does get wet, gently dry it as quickly and thoroughly as possible.

Related Posts:

Are Morganite Rings Expensive? Cost Per Carat vs Diamond

Are Morganite Rings Durable? How Long Can They Last?

How Can You Tell if Morganite is Real or Fake?